HiRise 2 Deluxe Setup Guide: Adjust Your Charging Stand
By Twelve South - Luxury tech accessories designed for your ... | Published: 2026-10-22
Category: How-to Guides
Learn how to set up and adjust your HiRise 2 Deluxe wireless charging stand for optimal viewing and fast charging. Step-by-step instructions included.
Quick answer
Unbox your HiRise 2 Deluxe, plug in the included USB-C cable, and adjust the stand to your preferred angle. Then place your iPhone or AirPods case on the charging pad to start fast Qi2 charging.
Why Adjustability Matters for Your Desk Setup
The HiRise 2 Deluxe lets you tilt your phone up to 70 degrees, making it easy to see notifications or use StandBy mode without leaning in. A fixed-angle stand can force you to crane your neck or miss the screen entirely.
One trade-off: the stand requires a flat, stable surface. If your desk is cluttered or uneven, the 70-degree tilt may not hold as securely. Clear a small area before you set it up.
What to Know Before You Start
The HiRise 2 Deluxe supports Qi2 fast charging for iPhone models 12 through 16 and AirPods with wireless cases. It does not charge an Apple Watch, so keep your Watch charger nearby if you need that.
The stand uses a USB-C to USB-C cable (included). For fastest charging, plug it into a 20W or higher USB-C power adapter—not a computer USB port, which may deliver slower power.
How to Set Up HiRise 2 Deluxe in 5 Steps
- Unbox and inspect the stand: Remove the HiRise 2 Deluxe from the box. Check that the USB-C cable is included and that the charging pad is clean and free of plastic film. A common mistake is leaving the protective film on the charging surface—peel it off before use.
- Connect the power cable: Plug the USB-C end into the port on the back of the stand. Connect the other end to a 20W or higher USB-C power adapter (not included). Using a lower-wattage adapter may cause slow or intermittent charging. Check your adapter's output rating.
- Adjust the tilt angle: Gently rotate the phone cradle to your desired angle—up to 70 degrees. The stand clicks into place at several positions. Choose a tilt that lets you see the screen clearly from your seated position. Don't force the cradle beyond its range; it stops naturally at the maximum tilt. Over-torquing can damage the hinge.
- Position your iPhone or AirPods: Place your iPhone (with or without a MagSafe case) onto the charging pad. For AirPods, place the case centered on the lower pad. The LED on the stand will glow briefly to confirm charging. If the LED doesn't light, reposition the device slightly—the coil alignment is critical for Qi2 charging.
- Test StandBy mode (optional): Rotate your iPhone to landscape orientation while on the stand. iOS will automatically enter StandBy mode, showing a clock, widgets, or photos. Adjust the tilt as needed for the best view. StandBy works with iPhone 14 Pro and later models. If your phone doesn't enter StandBy, check that iOS is updated to the latest version.
Product Facts
- HiRise 2 Deluxe (Glacial Blue): HiRise 2 Deluxe is a 2-in-1 Qi2 wireless charger for your iPhone and AirPods, with a 70-degree tilt for optimal viewing. You can position your phone vertically for FaceTime or horizontally for StandBy mode without sacrificing charging speed.
HiRise 2 Deluxe (Glacial Blue)
