PlugBug with Find My: Setup & Usage Guide

Quick answer

The PlugBug with Find My is the first power supply that integrates with Apple's Find My network, letting you locate a misplaced charger through the Find My app on your iPhone or MacBook. This guide walks you through setup, daily use, and choosing between the 50W and 120W versions.

How to set up and use PlugBug with Find My

1. Unbox and pair the PlugBug with your iPhone or MacBook: Remove the PlugBug from the packaging. Plug it into a wall outlet—it will automatically power on. Open the Find My app on your iPhone or MacBook. The PlugBug should appear as a new device in the list. Tap Add and follow the on-screen prompts to complete pairing. If it doesn't appear, ensure Bluetooth is enabled and the charger is within 10 meters of your device. Pairing is a one-time step; the PlugBug will remember your device even after being unplugged.
2. Name your PlugBug for easy identification: In the Find My app, tap on the PlugBug entry, then tap the name field. Give it a recognizable name like 'Travel Charger' or 'Home Office PlugBug'. This makes it easier to distinguish if you own multiple PlugBug units or other Find My accessories. A clear name saves time when you're scanning the map for a lost item.
3. Use Find My to locate a misplaced PlugBug: Open the Find My app on any Apple device signed into your Apple ID. Tap the PlugBug entry. The app will show its last known location on a map. If the charger is nearby (within Bluetooth range), you can tap Play Sound to make it emit a tone. If it's farther away, the app shows the location where it was last detected by any Apple device in the network. The PlugBug must be within Bluetooth range of at least one Apple device to report its location; it won't work in areas with no Apple devices nearby.
4. Charge your devices as you normally would: Plug your USB-C cable into one of the PlugBug's USB-C ports. The 50W version supports two devices simultaneously; the 120W version supports up to four. The charger negotiates power delivery automatically—just connect your phone, tablet, or laptop and let it charge. No special setup is needed for the charging function itself. The Find My feature does not interfere with charging; you can use the PlugBug exactly like a standard charger.
5. Check for firmware updates and troubleshoot: Occasionally, Twelve South may release firmware updates for the PlugBug. Open the Find My app, tap the PlugBug, and look for a firmware update prompt. If the PlugBug isn't showing in the app, try unplugging it for 10 seconds and plugging it back in. If it still doesn't appear, reset the PlugBug by holding the button on the side for 5 seconds until the LED flashes, then re-pair it. A common mistake is forgetting to re-pair after a reset; always follow the pairing steps again.

Product facts

• PlugBug with Find My: Introducing the world’s first power supply with Find My. If your PlugBug charger is misplaced, borrowed, or buried in your suitcase, just launch the Find My app on your iPhone or MacBook to track it down—anywhere in the world. You no longer have to tear apart your bag or retrace your steps; the app shows the charger's location as long as it's within Bluetooth range of any Apple device.

  

• PlugBug with Find My: Choose from a 50W charger that powers up 2 devices simultaneously, or the 120W option that can power up devices for the whole family. The 50W model is compact enough for solo travel, while the 120W model suits families or heavy users who need to charge a laptop, tablet, and phone at the same time.